TANKiT®

composite tank repair

EMERGENCY COMPOSITE REPAIR SOLUTION FOR TANK AND PRESSURE VESSEL REINFORCEMENT

Product Sheet

TANKiT® is an emergency and temporary reinforcement solution designed to reinforce tanks and pressure vessels, restore original asset integrity and prevent further deterioration. 

TANKiT® is a pre-engineered composite solution made of five Kevlar® patches impregnated with 3X specific resin. It can be applied without shutdown, unless active leakage.

This product is ready to use and does not require calculations. It can be used in specific conditions (up to 100mm defect size and maximum temperature +70°C).

USES

  • Repair external/internal corrosion
  • Repair through-wall defects up to 100mm
  • Stop the corrosion (if external defect)

APPLICATIONS

  • Onshore and offshore installations
  • Various tank designs and up to 20m tank diameter
  • Temperature up to +70°C (+158°F)
  • Compatible with most common fluid and gas

BENEFITS

  • No engineering, no calculations (ready-to-use)
  • Online repair (no loss of production)
  • Cold welding system, no heating or post-curing required
  • Versatile product with a large range of applications (storage and GRP tanks, pressure vessels, separators, columns)
  • Cost effective and easy to store

TANKiT® Components

1 TANKiT® = 1 repair

TANKiT® is a pre-engineered product sold in complete kit

Have a look to this CASE STUDY and discover how TANKiT® reinforced a water tank by sealing a leak of about 25mm

UseTANK & PRESSURE VESSEL REINFORCEMENT – ONSHORE & OFFSHORE
Service temperature-50°C / +70°C (-58°F / +158°F)
Application temperature+10°C / +70°C (+50°F / +580°F)
Maximum tank diameterUp to 20m
Maximum hole sizeUp to 100mm
Maximum pressureDepends on tank and defect diameter – See charts below (TANKiT® capacities)

EASY INSTALLATION BY TRAINED AND CERTIFIED APPLICATORS

Shopping Basket